If your home is humid, you might have a dehumidifier. These handy machines are designed to remove water from your air by using condensation that forms on your walls, ceilings, and floor. In addition to keeping things dryer in the home, a warm indoor climate can lead to respiratory issues and damage to sensitive electronics like computers and TVs. If yours isn’t working properly or collecting water effectively, it’s important to take action before it gets too bad!
- Empty the tank.
- Reinsert the water collection tray.
- Turn on the dehumidifier and let it run for about 30 minutes, checking to see if your problem has been solved. If it hasn’t, repeat steps 1-5 until you’ve emptied out all of its water and then cleaned everything up (including your hands).
The water collection tray is the first place to check. If you have a lot of humidity in your home, this tray will be heavily saturated with moisture because it’s not able to drain off all that extra moisture. To fix this problem, simply clean out the tray or replace it if necessary.
If your dehumidifier still isn’t collecting water in its collection tray after cleaning and checking all of these things, then there may be something wrong with either:
- An internal component such as a pump or fan motor (you can test for function by turning on both power sources at once)
- Or an external valve such as an inlet valve (you can test for function by turning on both power sources at once)
To drain the tank, you will need to use a garden hose. The first thing to do is make sure that the hose is not kinked or leaking. If it is, wrap it up in something like a t-shirt so that water doesn’t get trapped inside of it and cause problems later on down the road.
Next, make sure that your garden hose isn’t too long! You don’t want to be using too much water at once because this can put unnecessary strain on your system if there isn’t enough room inside of your home where all this excess liquid could go without causing damage or injury (and yes—it’s always better safe than sorry).
Finally, make sure when draining water from an evaporator dehumidifier; always keep in mind how fast you’re removing liquid from its storage container so as not overfill any potential leaks caused by excessive flow rates during operation.”
- Check the power supply
- Check the fuse
- Check the breaker (if applicable)
- Check to see if other outlets in your home are working properly and that they’re getting power from a wall switch or circuit breaker box that is labeled as “power” or “electrical outlet”. If you have any questions about this, contact an electrician for help with installing new wiring in your home’s electrical system!
If your dehumidifier is not collecting water, the problems could be hardware related or due to user error. Check the most common issues first:
- Check the water collection tray by removing it from its frame and shaking it upside down. Is there any water inside? If so, then you know that something has gone wrong with your unit’s collection system.
- Verify that your power supply is functional by plugging it into an outlet and turning it on for 20 minutes. This should flush any debris
- out of any ports or connections on your unit’s circuit board (which can seep into electronic components). If this doesn’t work, contact an authorized repair facility for assistance fixing this problem immediately!
Conclusion:
If your dehumidifier is not collecting water, the problems could be hardware related or due to user error. Check the most common issues first.
Check out our best pick dehumidifier GE Air Conditioner 5000 BTU.