As a homeowner, you don’t want to run your dehumidifier all day long. In fact, most people keep their dehumidifiers turned off during the day and use them at night only when they notice dampness in their homes. But it can be difficult to determine exactly how often to run your dehumidifier so that it doesn’t produce excess moisture or cause mold or mildew growth. The following tips will help you determine the best time for your particular situation:
1. If the room is damp, empty your dehumidifier water tank frequently, or condensation will accumulate on surfaces and cause mold or mildew problems.
If the room is damp, empty your dehumidifier water tank frequently. If you don’t empty the tank regularly and condensation builds up on surfaces, mold or mildew problems can occur.
In a humid climate (for example, if you live in an area with high humidity), it’s best to empty the tank every day.
2. In a dry climate, turn the dehumidifier fan on as much as possible, but keep the room door closed to restrict airflow.
In a dry climate, turn the dehumidifier fan on as much as possible, but keep the room door closed to restrict airflow. This will help to reduce both moisture in the air and dust in the air.
3. A dehumidifier can remove water from the atmosphere at a rate of up to 20 gallons (76 liters) per day.
The amount of water removed by the dehumidifier is determined by multiplying the cubic feet of space by the relative humidity and dividing by 20. For example, if you have a room that’s 400 square feet (37 m2) and has a relative humidity of 50%, then you’d be able to remove about 10 gallons (38 liters) per day from your home. This is just an example; different dehumidifiers will have different capacities and efficiencies so it’s best to check with your local hardware store or call them directly before buying any equipment!
4. Some models have an evaporator coil that freezes in low temperatures, which reduces their efficiency until they defrost.
- Some models have an evaporator coil that freezes in low temperatures, which reduces their efficiency until they defrost.
If a dehumidifier is used in a cold environment, it will not work as well because of this problem. The same thing happens if you leave your dehumidifier inside after it has been turned off and turned back on again later on—the evaporator coil could freeze over again, or worse yet: break!
5. The humidistat on your dehumidifier can be reset to more accurately measure humidity levels in the room, but you might need a screwdriver to access it.
If you have a dehumidifier, it’s likely that the humidistat is located somewhere inside the unit. This can be reset to more accurately measure humidity levels in the room, but you might need a screwdriver to access it.
If your humidistat isn’t working properly and you want to reset it, follow these steps:
- Turn off power source at breaker box or circuit breaker(s).
- Unplug electrical cord from outlet(s).
- Remove panel cover from back of unit by prying up on tabs with flathead screwdriver (or other tool capable of penetrating plastic).
- Inside there will be an indicator light panel with two switches: one labeled “ON,” which controls whether or not fans run; another labeled “OFF,” which controls how long they run for when turned off by pressing down on button repeatedly until desired feature activated by user who knows how long fan should run before turning off again
6. If there are dust particles or other debris in the air, clean your dehumidifier regularly to avoid clogging the filter or other parts of the system.
- If there are dust particles or other debris in the air, clean your dehumidifier regularly to avoid clogging the filter or other parts of the system.
- To clean a filter:
a) Use a soft brush (like an old toothbrush) that’s been soaked in mild soap solution and warm water;
b) Rinse it off with cold water before reusing it again; and
c) Change out your dehumidifier’s filters at least once every six months—or more often if you notice any signs of deterioration or wear on those filters!
7. You can purchase special tubes that attach to your dehumidifier so excess water drains out of the machine and into a floor drain or sump pump.
You can purchase special tubes that attach to your dehumidifier so excess water drains out of the machine and into a floor drain or sump pump.
These hoses usually have an attachment point on each end, one for the hose itself and another for the sink or other fixture you are draining into.
The most common types of drains are:
- Drain Hose – A drain hose allows you to remove water from your home when it’s too humid outside (or if you live in an area where there is too much evaporation). This type of hose connects directly from your unit’s output port(s) to something like a garden hose or faucet located indoors so that all that unwanted moisture can be drained away from its source instead of taking up valuable space within your home’s structure itself
8. Some models are designed for use in large spaces like basements and warehouses, while others are made for smaller areas such as bathrooms and bedrooms.
A dehumidifier can be used in large spaces like basements and warehouses, while others are made for smaller areas such as bathrooms and bedrooms. There are different types of dehumidifiers for different purposes.
Some models are designed for use in large spaces like basements and warehouses, while others are made for smaller areas such as bathrooms and bedrooms. There are also portable models that you can take with you wherever your home needs to stay dryer, whether it’s at work or on vacation!
Conclusion
While you may not need a dehumidifier in your home all the time and it might be tempting to buy one just because it’s on sale, don’t forget that you can use other methods of humidity control like ventilation or opening windows. Your home will also benefit from a little extra moisture if your air feels dry and stale even when there are no signs of mold or mildew growth. If this happens, consider buying a dehumidifier today!
Check out our best pick dehumidifier COLZER 140 Pint Dehumidifier.